A Digital Twin Framework for Traffic-Aware UAV Pavement Monitoring without Lane Closure

Abstract (EN)

UAV-based pavement inspection can reduce the cost and risk of road-surface monitoring, but real-world deployment remains difficult when traffic, pedestrians, and temporary occlusions affect the visibility of defects. This paper presents a Unity-based digital twin framework for traffic-aware UAV pavement monitoring without lane closure. The proposed environment integrates procedurally generated road defects, dynamic vehicles and pedestrians, autonomous UAV navigation, and an embedded road-damage perception pipeline. The perception module uses a two-stage approach: a lightweight YOLOv8n detector first localises road defects, pedestrians, and vehicles, while a second classifier distinguishes among potholes, single cracks, and crocodile cracks. On the simulator test set, the full pipeline achieved 99.26% overall accuracy across five classes. The digital twin was then used to evaluate three recovery strategies for occluded road segments: hover-and-recheck, micro-repositioning, and skip-and-revisit. Experiments were conducted across different traffic densities and flight altitudes using coverage, mission time, energy consumption, and revisit ratio as operational metrics. Results show that flight altitude has a strong influence on inspection coverage and that adaptive recovery improves performance under occlusion. In particular, hover-and-recheck achieved the most consistent coverage under medium and high traffic conditions, reaching up to 97.03% coverage, while skip-and-revisit was most effective in low-traffic scenarios, reaching 97.95\% coverage at medium altitude. These results demonstrate that digital twins can support the development and evaluation of traffic-aware UAV inspection strategies before real-world deployment.

摘要 (ZH)

基于无人机的路面检测可降低道路表面监测的成本和风险,但在实际部署中,当交通、行人和临时遮挡影响缺陷可见性时仍面临困难。本文提出一个基于Unity的数字孪生框架,用于无需封闭车道的交通感知无人机路面监测。该环境集成了程序生成的随机道路缺陷、动态车辆与行人、自主无人机导航以及嵌入式路面损伤感知流水线。感知模块采用两阶段方法:轻量级YOLOv8n检测器首先定位道路缺陷、行人和车辆,随后第二级分类器区分坑洞、单裂缝和鳄鱼裂缝。在模拟器测试集上,完整流水线在五类目标上达到99.26%的总体准确率。随后利用该数字孪生评估了三种遮挡路段恢复策略:悬停重检、微调重定位和跳过重访。实验在不同交通密度和飞行高度下展开,以覆盖率、任务时间、能耗和重访比作为运行指标。结果表明飞行高度对检测覆盖率有显著影响,自适应恢复策略可提升遮挡条件下的性能。其中,悬停重检策略在中高交通条件下达到最稳定的覆盖率(最高97.03%),而跳过重访策略在低交通场景中最有效(中等高度下达到97.95%覆盖率)。这些结果证明数字孪生能够支持在实际部署前开发和评估交通感知的无人机检测策略。

← Back